Hitachi 3080 G1, Справочник по аппаратуре

Страница: 101 / 138

7. Once the rebuild process has successfully completed, run the trouble
chassis-drive
command.
If the command response displays issues, resolve them if possible, or
contact technical support for assistance.
If the command response displays “No faults found,” continue the disk
replacement process by replacing the second hard disk.
8. Shut down the server.
Step 8: Replacing the server’s second disk
Once the server’s first hard disk has been replaced and synchronized, replace
the second disk. Refer to Step 6: Replacing a Server’s Internal Hard Disk on
page 93 for the steps required to replace the server’s second hard disk.
Step 9: Synchronizing the second new disk
Once the server’s second hard disk has been replaced, synchronize the
server’s second hard disk to restore the integrity of the server’s internal RAID
subsystem. Refer to
Step 7: Synchronizing server’s new disk on page 100 for
the steps required to synchronize the server’s second hard disk.
Once the second hard disk is synchronized, log out by entering the
exit
command or pressing the Ctrl+D keys.
Step 10: Restore EVSs (cluster node only)
If replacing the hard disks in a standalone server, skip this step. If replacing
the hard disks in a cluster node, return each of the EVSs to its preferred node
(the node with the replaced disks).
The preferred mapping of EVSs to cluster nodes should have been saved in
Step 5: Save the preferred mapping and migrate EVSs (cluster node only) on
page 91
. To return each EVSs to its preferred node using the preferred
mapping:
Procedure
1. Connect your laptop to the customer’s network.
2. Using a browser, go to
http://
[ SMU_IP_Address ]/
where [ SMU_IP_Address ] is the IP address of the SMU (System
Management Unit) managing the cluster
3. Log into Web Manager as user manager. By default, the password is
nasadmin but this password may have been changed.
4. Navigate to Home > Server Settings > EVS Migration to display the
EVS Migration page.
Hard disk replacement 101
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference