Hitachi 3080 G1, Справочник по аппаратуре

Страница: 91 / 138

2. Physically locate the server that has the disks to be replaced. After you
have identified the server, press any key to stop the LEDs from flashing.
Step 5: Save the preferred mapping and migrate EVSs
(cluster node only)
If replacing the hard disks in a standalone server, skip this step. If replacing
the hard disks in a cluster node, before shutting down the node to replace
disks, migrate the EVSs to another node. You can migrate an individual EVS
to a different node within the same cluster, or you can migrate all EVSs to
another server or another cluster.
The current mapping of EVSs to cluster nodes can be preserved, and the
saved map is called a preferred mapping. Saving the current EVS-to-cluster
configuration as the preferred mapping helps when restoring EVSs to cluster
nodes. For example, if a failed cluster node is being restored, the preferred
mapping can be used to restore the original cluster configuration.
Procedure
1. Connect your laptop to the customer’s network.
2. Using a browser, go to
http://
[ SMU_IP_Address ]/
where [ SMU_IP_Address ] is the IP address of the SMU (System
Management Unit) managing the cluster
3. Log into Web Manager as user manager. By default, the password is
nasadmin but this password may have been changed.
4. Navigate to Home > Server Settings > EVS Migration to display the
EVS Migration page.
Note: If the SMU is currently managing a cluster and at least one
other cluster or standalone server, the following page appears:
Hard disk replacement 91
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference