Hitachi 3080 G1, Справочник по аппаратуре

Страница: 89 / 138

• For a multi-node cluster, record all cluster node IP addresses.
5. Run the
chassis-drive-status
command
6. Review the values in the Status and % Rebuild columns for each
device.
The response to the command should be similar to the following:
Device Status % Used Size (4k blks) Used (4k blks)
% Rebuild
------ ------------ ------ -------------- --------------
------------
0 Good 32 3846436 1266962
Synchronized
1 Good 3 12302144 463572
Synchronized
2 Good 0 0 0
Synchronized
Success
For each device, the Status should be “Good” and the %Rebuild should
be “Synchronized.”
• If the values are correct, repeat the health check, as described in
Step1: Performing an Internal Drive Health Check on page 83 .
• If the values are not correct, run the
trouble chassis-drive
command. If the command response displays
“No
faults found,”
repeat the health check, as
Hard disk replacement 89
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference