HIT FITNESS Multi-Gym, Руководство пользователя

Страница: 5 / 17

Multi-Gym
Assembly Instructions
Step 2: Connecting lower transverse tube
What you will need:
• Lower transverse tube x 1
Directions
Take the lower transverse tube and align it on the base frame, between the support frame
and dip bar.
Feed two M10*75 screws and arc washers through the outside hole. Using two M10 nuts
on the other side, loosely tighten the screws
Note: Do not tighten until the upper transverse tube is connected.
Repeat on the other side
Screws and Tools:
• Open-end wrench
• Allen key (large)
• M10*75 screw x 4
• Arc (curve) washer x4
• M10 nut x 4