HIT FITNESS Multi-Gym, Руководство пользователя

Страница: 6 / 17

Multi-Gym
Assembly Instructions
Step 3: Connect upper transverse tube
What you will need:
• Upper transverse tube x 1
Directions
Take the upper transverse tube and align it on the left dip bar
Feed two M10*45 screws and flat washers through the outside hole. Using two M10 nuts
on the other side, loosely screw the upper transverse tube in place
Repeat on the right side
Tighten lower and upper transverse tubes with an open-end wrench and Allen key.
Screws and Tools:
• Open-end wrench
• Allen key (large)
• M10*45 screw x 4
• Flat washer x4
• M10 nut x 4