Hisense 50K610GW, Руководство пользователя

Страница: 9 / 42

3
Getting Started
Accessories List
Installing the Stand
USER MANUAL
Quick Setup Guide
User Manual Quick Setup Guide Warranty Card Remote Control Battery × 2 Spacer × 4
NOTES
1. The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or
sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure
on the front of the TV at any time because the screen could crack.
2. For tabletop use, the TV must be attached to the provided stand as shown on this page.
3. To Wall-Mount, brackets (not provided) must be attached to the TV as shown on next page.
Follow the illustrations below to complete the installation steps:
1. Secure the stand column to the base plate with the 4 screws (M4×12mm for 50" and M5×12mm for 55") provided. See
Figure 1.
2. Secure the stand cover to the stand column vertically with the 2 screws (M4×12mm for 50" and M5×12mm for 55") provided.
See Figure 2.
3. Secure the stand cover to the stand column horizontally with the 2 screws (ST4×14mm) provided. See Figure 3.
WARNING
Be sure to disconnect the AC power cord before installing a stand or Wall-Mount brackets.
CAUTION
Use a covered table or bench to lay the TV on and handle the TV carefully to prevent damage to the TV screen or cabinet
during assembly.
2 3 1
4 screws
(M4×12mm for 50" and
M5×12mm for 55")
screws
(M4×12mm for 50" and M5×12mm for 55")
Screw
(ST4×14mm)
for 50K610GW(50") (M4 × 12mm) × 6 (ST4 × 14mm) × 2 (M5 × 12mm) × 4 (M6 × 45mm) × 4
for 55K610GW(55") (M5 × 12mm) × 10 (ST4 × 14mm) × 2 (M6 × 45mm) × 4
Warranty Card
Screws: