Hisense 2AMW-42U4RRA, Техническое и сервисное руководство, Страница: 41 / 80

8. WIRING DIAGRAM
8.3 Common wiring
Electrical wiring diagram
Note: For some indoor units
●
Use an ELB (Electric Leakage Breaker).
●
Do not operate the system until all the check points have been cleared.
(A)
Check to ensure that the insulation resistance is more than 2 Mega Ohm, by measuring the
resistance between ground and the terminal of the electrical parts. If not, do not operate the
system until the electrical leakage is found and repaired.
(B)
Check to ensure that the stop valves of the outdoor unit are fully opened and then start the
system.
Max
.
Running Current
(
A
):
REFER TO NAMEPLATE
Outdoor unit
Indoor unit A
Indoor unit B
Terminal
Terminal A
Terminal B
Terminal
Terminal
Power supply
4(SI)
4(SI)
4(SI)
4(SI)
1(L)
1(L)
1(L)
1(L)
2(N)
2(N)
2(N)
2(N)
Power connecting cord
Power connecting cord
Power connecting cord
Power connecting cord
Power connecting cord
N
L
Indoor unit C
Terminal C
Terminal
4(SI)
4(SI)
1(L) 1(L)
2(N) 2(N)
Indoor unit D
Indoor unit E
Terminal D
Terminal E
Terminal
Terminal
4(SI)
4(SI)
4(SI)
4(SI)
1(L)
1(L)
1(L)
1(L)
2(N)
2(N)
2(N)
2(N)
NOTES:
1. For 12K/14K/18K models, there is no INDOOR UN C, D and E.
2. For 21K/24K models, there is no INDOOR UN D and E.
3. For 36K model, there is no INDOOR UN E.
Recommend Wire Size
Model
Capacity
Power Supply
ELB
Power Source
Cable Size
Transmitting
Cable Size
Circuit
Breaker(A) Nominal
Current (A)
Nominal Sensitive
Current (mA)
EN60335-1
12K/ 14K/18K 220-240V ~, 50Hz 25 30 3×1.5mm² 4×1.5mm² 25
21K/24K/
27K/36K
220-240V ~, 50Hz 32 30 3×2.5mm² 4×1.5mm² 32
42K 220-240V ~, 50Hz 63 30 3×6.0mm² 4×1.5mm² 63
EN60335-1
Power connecting cord
Outdoor unit Indoor unit
4(SI)
4(SI)
1(L) 1(L)
0(L)
2(N)
2(N)
3( )
37