HISCO DVR series, Руководство пользователя

Страница: 3 / 127

Hisco® DVR Series User’s Manual
3
Installation and Proactive Steps
PRE-CAUTIONS
•
Should any liquid or solid object fall into the cabinet, unplug the unit, and have it checked
by the qualified personnel before operating it any further.
•
Unplug the unit from the wall outlet if it is not going to be used for several days or more.
•
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
•
Allow adequate air circulation to prevent internal heat build-up.
•
Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains,
•
draperies) that may block the ventilation holes.
Location conditions to avoid for installing Hisco DVRs:
•
Excessive heat, such as direct sunlight or heating appliances
•
Surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the
ventilation holes.
•
Moisture, dust, and smoke
•
Magnetic fields or electrical waves
•
Below freezing temperatures
Installation:
Before installing the system, please ensure that
•
The power is switched off
•
The unit has adequate air circulation to prevent internal heat build-up
•
There is enough room for the unit and its connecting cables
•
The unit is placed on an even surface
•
The unit is not placed near any electronic equipment (e.g. microwave, radio, or any
wireless equipment such as cell phones)
•
The unit is not expose to rain or water. The unit is not designed to be waterproof
•
A UPS is used with the Hisco DVR unit to protects DVR from surges, spikes, lightning and
other power disturbances
g g
N
N
o
o
t
t
e
e
: A UPS must be used to comply with our warranty