HISCO DVR series, Руководство пользователя

Страница: 18 / 127

Hisco® DVR Series User’s Manual
18
•
Hide Screen : If this option is selected, the camera will not be displayed on the main
screen but it will still record. Make sure that "Same Settings for all Cameras" is
unchecked while you hide screen
•
Advanced : Specify the pre
frames and post
frames
- Pre Frames : Pre event
recording frame rate:
1 frame ~ 60 frames
- Post Frames : Post
Alarm recording frame
rate: 1 frame ~ 60
frames
•
Record : Specify the
recording image
resolution, quality
(compression ratio),
recording speed.
-
Resolution : Specify the
recording resolution.
Select the resolution for each camera:
320x240, 640x240, 640x480 (NTSC,PAL)
(NOTE: 640X480 resolution will result in
large file size)
- Quality : Specify the recording image quality:
Wavelet Setting: 10:1, 20:1, 40:1, 60:1,
80:1, 100:1
(NOTE: 10:1 will result in good quality picture but large file
size)
M-jpeg Setting: 85(Highest), 75, 65, 55(Standard), 45, 35(Lowest)
(NOTE: 85 will result in good quality picture but large file size)
- Speed : Specify recording frame rate.
Select the frame rate for each camera: 1 frame/sec ~ 30 frame/sec
•
Schedule : Specify the weekly schedule for each camera (Hourly).
- Watch : No recording
- Continuous : Time lapsed recording
-
Motion : Recording on motion detection
-
Sensor : Recording on sensor operation
- Motion & Sensor : Recording on sensor and motion detection operation
- Event : normally continuous recording (1fps), configured recording frame rate will be
activated when event occurs. (sensor or motion detected)