Service Manual
DS 350 GM
Rev A 05/01/01 // SB
190113_A
10
ERROR
CODE
ERROR
CAUSE
ACTION
E57
Error in serial crane data
EEPROM.
Serial crane data EEPROM
does not contain valid data.
Memory module defective
Write data on the serial crane data
EEPROM (by means of test
program or on-line function), then
restart the LMI
Replace EPROM Module and
reset pressure channels. Refer to
Drawing 4 and Procedure 4.
E58
Error in the serial analog
data EEPROM.
No valid data in the serial
analog data EEPROM.
LMI main board defective.
Write data on the serial analog
data EEPROM by means of the
test program, then, restart the LMI
Replace LMI main board.
E69
Error in the load chart
EPROM
Memory module wrongly
bridged
Bridge memory module acc. to
memory type
The number of the
selected EPROM base
and the programmed
value are not identical
Load chart EPROM defective Replace load chart EPROM
E70
Error in digital output
module.
Central unit unable to
correspond with digital
output module.
a.) Check supply voltage.
b.) Replace digital output
module.
E71
Incorrect
acknowledgment of the
1. Relay on the main
board.
a.) Anti Two-block relay is
stuck or defective.
b.) Anti Two-Block relay is
not being selected due to a
break on the main board.
Replace main board. Refer to
Drawing 4 and Procedure 3.
E72 –
E77
Analogous to E71 for
the relays 2...7.
Analogous to E71 for the
relays 2...7.
Analogous to E71 for the relays
2..7.
E84
Wrong rigging condition. The selected rigging
condition is not contained in
the data EPROM.
Select another rigging condition
Check the programming in the
data EPROM.
E85
Error in the radius
determination
The computed radius is too
small (negative deflection)
Check the programming in the
data EPROM.
E89
Change of the
operating code during
lifting a load.
The operating mode switch
in the console was used
during lifting a load.
Lower the load and set the
operating mode switch correctly
to the code assigned to the actual
operating mode of the crane.
38 Years Specializing
in Crane Electronic Repair & Parts Sales
Call Us. We are glad to help
Bode Technical Services Inc
Email: [email protected]
Phone No.: +1.303.433.8878