Hirschmann OCTOPUS 8M Series, Руководство пользователя

Страница: 17 / 46

Installation OCTOPUS 8M/16M/24M/OS32
Release 11 01/2013
17
1.5.4 100/1000 Mbit/s FO connection
(SFP, IP67-V1 connector based on IEC 61076-3-106,
variant 1)
100/1000 Mbit/s F/O ports enable the connection of terminal devices or
independent network segments according to the IEEE 802.3 100BASE-
FX/1000BASE-SX/1000BASE-LX standard.
These ports support:

Full duplex mode
State on delivery:
 OCTOPUS OS32-08xx02O6O6TPEPHH:
Empty SFP slots, prepared for the use of SFP transceivers
(see page 42
“Accessories”) :

OCTOPUS OS32-08xx02O6O6TPEPH1:
SFP shafts equipped with the Fast Ethernet transceiver M-Fast
SFP-SM/LC EEC
Patch cables Wire pairs
M12 4-pin on M12 4-pin, crossed
(MDI to MDI) 1 (TX+) – 2 (RX+)
2 (RX+) – 1 (TX+)
3 (TX
− ) – 4 (RX − )
4 (RX − ) – 3 (TX − )
M12 4-pin on M12 4-pin, 1:1
(MDI to MDI-X via auto-crossing port) 1 (TX+) – 1 (RX+)
2 (RX+) – 2 (TX+)
3 (TX
− ) – 3 (RX − )
4 (RX − ) – 4 (TX − )
M12 4-pin on RJ45, crossed
(MDI to MDI (terminal device)) 1 (TX+) – 3 (RX+)
2 (RX+) – 1 (TX+)
3 (TX
− ) – 6 (RX − )
4 (RX − ) – 2 (TX − )
M12 4-pin on RJ45, 1:1
(MDI to MDI-X (Switch)) 1 (TX+) – 1 (RX+)
2 (RX+) – 3 (TX+)
3 (TX
− ) – 2 (RX − )
4 (RX − ) – 6 (TX − )
M12 8-pin on RJ45 1 (BI_DB+) – 1 (BI_DB+)
2 (BI_DB
− ) – 2 (BI_DB − )
3 (BI_DA+) – 3 (BI_DA+)
4 (BI_DA
− ) – 6 (BI_DA − )
5 (BI_DC+) – 7 (BI_DC+)
6 (BI_DC
− ) – 8 (BI_DC − )
7 (BI_DD − ) – 5 (BI_DD − )
8 (BI_DD+) – 4 (BI_DD+)
M12 8-pin on M12 8-pin, 1:1 1 (BI_DB+) – 1 (BI_DB+)
2 (BI_DB
− ) – 2 (BI_DB − )
3 (BI_DA+) – 3 (BI_DA+)
4 (BI_DA
− ) – 4 (BI_DA − )
5 (BI_DC+) – 5 (BI_DC+)
6 (BI_DC
− ) – 6 (BI_DC − )
7 (BI_DD − ) – 7 (BI_DD − )
8 (BI_DD+) – 8 (BI_DD+)
Table 4: Patch cables for operating the device