manualshive.com logo in svg

Hirschmann OCTOPUS 16M-8PoE-2FX, Руководство пользователя

Поделиться
Скачать
Hirschmann OCTOPUS 16M-8PoE-2FX Скачать руководство пользователя страница 9

OCTOPUS 8M/16M/24M/OS32

Release 10 05/2012

9

Non-observance of these safety instructions can therefore cause material 
damage and/or injuries.

Only appropriately qualified personnel should work on this device or in 
its vicinity. Qualified personnel must be thoroughly familiar with the 
warnings and maintenance procedures in accordance with this 
operating manual.

The proper and safe operation of this device depends on proper 
handling during transport, proper storage and assembly, and 
conscientious operation and maintenance procedures.

Never start operating the device with damaged components.

Only use the devices in accordance with this manual. In particular, 
observe the warnings and safety-related information. 

Any work that may be required on the electrical installation may only 
be carried out by personnel trained for this purpose.

Relevant for OCTOPUS 16M-2FX, OCTOPUS 16M-8PoE-2FX, 
OCTOPUS 24M-2FX, OCTOPUS OS32-08xx02O6O6...:

Note: 

LED or LASER components in compliance with IEC 60825-1 

(2007):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT

National and international safety regulations

Make sure that the electrical installation meets local or nationally 
applicable safety regulations.

E marking

The devices comply with the regulations contained in the following 
European directive(s): 

72/245/EWG, 2009/19/EG
Guideline for standardizing the regulations of member states relating to 
radio interference from motor vehicles. Certified devices are marked with 
an e1 type approval indicator.
(Relevant for OCTOPUS 8M-8PoE, OCTOPUS 8M-6PoE, OCTOPUS 
16M-8PoE, OCTOPUS 16M-8PoE-2FX, OCTOPUS 24M-8PoE)

Rule No.10 of the Economic Commission for Europe (ECE): Devices with 
a certification are labelled with the E1 type-approval mark.
(Relevant for OCTOPUS OS32...)

Note: 

For use in connection with a suitable type approved power supply 

only.

Содержание OCTOPUS 16M-8PoE-2FX













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды