Hirschmann HiSecOS EAGLE20, Руководство пользователя

Страница: 8 / 64

8
Installation EAGLE20/30
Release 12 03/2021

Installation site requirements

If you connect the device to a power supply that does NOT meet the
requirements for Limited Power Source, NEC Class 2 or PS2
according to IEC/EN 62368-1 and is
NOT limited to 100 W output
power, the device must be installed in either a switch cabinet or other
fire enclosure.
The fire enclosure can be made of metal or plastic with fire-protection
properties of at least V-1 according to IEC 60695-11-10. Bottom
openings of the fire enclosure must
NOT exceed 2 mm in diameter.

Only for device variants featuring supply voltage with characteristic
value K9 or KK:
Install this device only in a switch cabinet or in an operating site with
restricted access, to which maintenance staff have exclusive access.

Strain relief
Note: If the strain relief is insufficient, there is a risk of torsion, contact
problems and creeping interruptions.

Relieve the connection points of cables and lines from mechanical
stress.

Design strain relieves in such a way that they prevent any mechanical
damage to cables, wires or conductors caused by external influences
or their own weight.

To prevent damage to device connections, connectors and cables,
follow the instructions for proper installation in accordance with DIN
VDE 0100-520:2013-06, sections 522.6, 522.7 and 522.13.

Device casing
Only technicians authorized by the manufacturer are permitted to open
the casing.

Never insert pointed objects (narrow screwdrivers, wires, etc.) into the
device or into the connection terminals for electric conductors. Do not
touch the connection terminals.

Keep the ventilation slits free to ensure good air circulation.
See “Installing the device onto the DIN rail” on page 33.

Mount the device in the vertical position.

At ambient air temperatures > +140 °F (+60 °C):
The surfaces of the device housing may become hot. Avoid touching
the device while it is operating.

Qualification requirements for personnel

Only allow qualified personnel to work on the device.