Hirschmann HiSecOS EAGLE20, Руководство пользователя

Страница: 31 / 64

Installation EAGLE20/30
Release 12 03/2021
31

Voltage not potential-separated

Supported file system: FAT32
1.9 Input/output interfaces
1.9.1 Signal contact
Figure 2: Signal contact: 2-pin terminal block with screw locking
In the state on delivery, the signal contact indicates the device status. It is
configurable using the device management.
1.9.2 Digital input (optional)
Note: Only for supply voltage with the following characteristic values:
 CC
 K9
The support of the function is dependent on the software release. Software
support for the function is unimplemented at the time of publishing this
manual.
Figure 3: Input: 2-pin terminal block with screw locking
Figure Pin Function
1 VCC (VBus)
2 - Data
3 + Data
4 Ground (GND)
Table 8: Pin assignment of the USB interface
1 2 4 3