Hirschmann EAGLE One, Руководство пользователя

Страница: 34 / 54

34
Installation EAGLE One
Release 06 12/2018
2.6 Connecting data cables
In general, adhere to the following recommendations for data cable connec-
tions in environments with high electrical interference levels:
 Keep the length of the data cables as short as possible.

Use optical data cables for the data transmission between the buildings.
 When using copper cables, provide a sufficient gap between the power
supply cables and the data cables. Ideally, install the cables in separate
cable channels.
 Use shielded cables.
Note: Verify that you connect only optical ports with the same optical trans-
mission properties with each other.
Further information:
See “10/100 Mbit/s twisted pair port” on page 23.
Further information:
See “100 Mbit/s F/O port” on page 23.

Connect the device via the INTERN port to the internal network or the
local computer that you want to help protect.

Connect the device via the EXTERN port to the external network, such as
the Internet. This network is used to set up the connections to the external
device or external network.