09
Start and Stop
■
Start the Screwdriver
❶
Pull the switch lever to start the bit turning. Release it to stop turning.
■
Stop the Screwdriver
❶
When the set torque is reached, the clutch in the screwdriver works to stop turning.
Adjust Torque
CAUTION
The "reference table of output torque" and the torque adjustment scale are approximate and do not
guarantee actual setting values.
For accurate torque check, please use an HIOS torque meter and Fidaptor.
❶
If the torque is determined beforehand, turn the torque adjustment nut and nut fixing ring
referring to the "reference table of output torque".
◦
Turn the torque adjustment nut clockwise to increase the torque and turn
it counterclockwise to decrease the torque.
◦
Adjust it so that the end face of the nut fixing ring is right above the scale.
◦
After the nut fixing ring is positioned, fit the torque adjustment nut
accordingly.
❷
Try to fasten a screw and check how it is fastened after the screwdriver stops and adjust the most
appropriate torque.
■
Reference Table of Output Torque
PG-3000
PG-3000
Torque Scale
1
0.3
0.2
0.5
0.55
0.4
N·m
2 3 4 5 6 7 8
PG-5000
PG-5000
Torque Scale
1
0.4
0.6
1.0
0.8
1.2
N·m
2 3 4 5 6 7 8
PG-7000
PG-7000
Torque Scale
1.0
1.4
1.2
1.6
2.0
1.8
2.6
2.2
2.4
2.8
N·m
2
1
3 4 5 6 7 8 9 10
