HIOS PG Series, Руководство пользователя

Страница: 15 / 24

15
■ Data Output Format by Either RS-232C or USB Connection
The data for judgment is output for each measurement in the three formats in the sequence below.
・
Measurement Data
D10
XXXX XXXXX<LF>
❶ ❷
❶
Torque conversion value – 4 digits
❷ Measurement time – 5 digits (unit: mS)
・
Recorded Learning Value
D00
XXXX XXXX XXXX XXXXX XXXXX<LF>
❸ ❹ ❺ ❻ ❼
❸
Display learning number
❹ Display learning minimum value
❺
Display minimum learning measurement time
❻ Display learning maximum value
❼
Display maximum learning measurement time
・
Judgment reference values
❽ ❾ ❿ ⓫ ⓬
D20 XX XXXX XXXX XXXXX XXXXX<LF>
❽
Judgment error rate
❾
Judgment minimum value
❿
Judgment measurement time minimum value
⓫
Judgment maximum value
⓬
Judgment measurement time maximum value
Error-related Output
E90 End which cannot be detected by 0 areas, and judged
[Zero area detection/Impossible
judgment ending]
E91 Abnormal termination at measurement time
[The abnormally end at the
measurement time]
E92 Study shortage and end which cannot be judged
[The ending about which it is
impossible to judge by the
learning
lack]
E93 Judgment=LOW NG [Judgment = Low NG]
E94 Judgment=HIGH NG [Judgment = High NG]
Measurement Judgment Output
E00 Judgment=GOOD [Judgment = Good]
E01 Judgment=LOW OK [Judgment = Low OK]
E02 Judgment=HIGH OK [Judgment = High OK]