manualshive.com logo in svg

HIOS PG Series, Руководство пользователя

Поделиться
Скачать
HIOS PG Series Скачать руководство пользователя страница 5

05

Setting Up the Device

■

Connect the Cords

Connect all the attached cords.
After all cords are successfully connected, put the power plug into an outlet.

 CAUTION

◦

 Make sure the combination of the screwdriver and the power supply is appropriate.

◦

 Make sure the power is off.

❶

Connect the plug and screwdriver cord to the power supply.

❷ 

Connect the screwdriver and sensor cords to the screwdriver and connect the sensor cord to 
PG-01.

❸

Connect the AC adapter to PG-01.

■

Install the Bit

 CAUTION

◦

 Do not install or remove the bit with the power on. It may cause an accident.

❶

Insert the bit while pushing the joint shaft collar into the body.

 

❷

Release the collar and check if the bit is locked.

◦

Pull the bit gently to confirm it does not come out.

Remove the Bit

❶

Pull out the bit while pushing the collar against the body.

■

Turn On the Power

❶

Turn on T-70BL and PG-01.

 CAUTION

PG-01 automatically performs zero-adjustment when the power is turned on. Do not apply a load to 
the tip of the screwdriver or do not start the screwdriver during the adjustment.

Содержание PG Series

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды