HIOS HSF-10 Скачать руководство пользователя страница 2

Страница: 2 / 28

Contents

1. Before using this device ...................................................... 1

2. Precautions for use.............................................................. 1

3. Names and explanations of parts ........................................ 3

4. Making checks and adjustments before use ....................... 5

5. Maintenance ...................................................................... 17

6. Replacement and adjustment of parts ............................... 17

7. Other ........................................................................................................21
8. Troubleshooting .......................................................................................22

9. Specifications

..........................................................................................25

10. External Diagram

...................................................................................26

11. THE FOLLOWING TABLE IS FOR CHINA RoHS2 .............................27

1. Before using this device

Thank you for purchasing the HSF Series automatic screw feeder.

Before using this device, please check that the following items have been supplied.

* 1 x CD-ROM * 1 x hexagonal L-shaped wrench

* 1 x AC adapter* * 1 x Ground wire

2. Precautions for use

Installation area

Caution Install the device on a level and stable surface.

Installing the device on an unstable surface may cause the device to fall, causing injuries.

Do not install the device in an area with flammable or combustible gases, or an area with high humidity.

AC Adapter

Caution Do not use any adapter except the one provided with the device.

Rail Do not damage the rail. Do not apply oil to the rail.

Regular cleaning of the rail is recommended.

- 1 -

Содержание HSF-10





























Результаты поиска

Содержание HSF-10

Отзывы:

Бренды по названию

Популярные бренды

HIOS HSF-10, Инструкция по эксплуатации

Результаты поиска

Содержание HSF-10

Отзывы:

Бренды по названию

Популярные бренды