manualshive.com logo in svg

Hioki MR8904, Инструкция по эксплуатации

Поделиться
Скачать
Hioki MR8904 Скачать руководство пользователя страница 64

7.4  MR8904 CAN Editor General Specifications

60

7.4

MR8904 CAN Editor General Specifications

Supported operating systems

Windows XP 32-bit

Windows Vista/7/8 32-bit and 64-bit

Recommended display 

resolution

1280 x 960

Interface

USB

Supported measuring 

instrument

Hioki MR8875 Memory HiCorder

CAN definition settings

1. Item number: Starting at 1
2. CAN message ID: 0 to 1FFFFFFF H
3. Start position: 0 to 63
4. Data length: 1 to 32
5. Data order: U/L (Motorola), L/U (Motorola), L/U (Intel)
6. Sign: Unsigned, 1-signed, 2-signed
7. Signal name: Up to 40 characters
8. Label name: Up to 16 characters
9. Scaling unit: Up to 7 characters
10. Scaling value: Bit rate/offset value or maximum value/minimum value

Definition file memo

Memos consisting of up to 50 characters can be stored in the CAN definition file.

Password

A password of up to 20 characters can required in order to edit CAN definitions.

CANdb file

1. Supported: Loading, conversion to CAN definition data file format (.CDF), regis-

tration to register list

2. Not supported: Editing 
3. Data of 33 bits and more is not supported.
4. Data order: Conversion from Motorola (CANdb file) to U/L (Motorola)
5. Conversion from signed (CANdb file) to 2-signed; IEEE float and double 

(CANdb file) are not supported.

6. Conversion from signal name (CANdb file) to label
7. Conversion from comment (CANdb file) to signal name

Register list settings

1. CAN input port setting: Select port 1 or port 2.
2. Item number: 1 to 200
3. Display upper and lower limit value settings on Memory HiCorder

Set unit position

Unit 1 to Unit 4

CAN communications settings

1. Set (2) to (5) for each port.
2. Interface: High-speed, low-speed, or single-wire
3. Terminator: On/off (on is valid with high-speed interfaces only)
4. ACK: On/off
5. Baud rate: Auto (valid during ACK off only)

High-speed CAN: 1M, 800k, 500k, 250k, 125k, 100k, 83.3k, 62.5k, 50 kbps

Low-speed CAN: 125k, 100k, 83.3k, 62.5k, 50k, 33.3k, 20k, 10kbps

Single-wire CAN: 83.3k, 62.5k, 50k, 33.3k, 20k, 10kbps

Analog channel settings

1. Number of channels: 15
2. Definitions on register list within 16 bits are allocated to 1 channel.
3. Definitions on register list from 17 to 32 bits are allocated to 2 channels.

Logic channel settings

1. Number of channels: 16
2. Definitions on register list within 16 bits and their bit position are allocated.
3. Definitions on register list are allocated as ID triggers.

Содержание MR8904









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды