Hioki MR8904, Инструкция по эксплуатации

Страница: 44 / 72

5.4 Creating Condition Settings Files
40
Next, allocate channels by creating an MR8904 analog assign list and MR8904 logic assign list from the
MR8904 register list.
Allocating channels (Creating MR8904 analog/logic assign lists)
Drag and drop items displayed in the [MR8904 Register List] to the [MR8904 Analog
Assign List] and [MR8904 Logic Assign List] .
<< [MR8904 Analog Assign List] >>
<< [MR8904 Logic Assign List] >>
Example:
Allocate
[Temp] data to channel 7
(drag and drop).
• A total of 15 data items corresponding to channels 1 to 15 can be allocated in the
[MR8904 Analog Assign List] . You can drag and drop each item to the desired
channel number (1 to 15) shown in the [Ch] column.
• Definitions of 17 to 32 bits use two analog channels.
Example:
[Logic]
Allocate 9 bits of definition
data starting at bit 5 (drag and
drop). (The 9 bits from bit 5 to
bit 13 will be automatically al-
located with the bit at which
the data was dropped as the
LSB*.)
*: See "How to count the bit po-
sition" (p.28).
When you drag and drop data items, a dialog box will be
displayed asking whether you wish to register the item
normally (definition allocation) or as an ID trigger (ID trig-
ger allocation). Select
[Assign Definition] .