Hioki DSM-8542, Инструкция по эксплуатации, Страница: 99 / 140

89
Table 7.3 Setting Control Program Messages 8/13
Mnemonic Description Format
PWS Measuring power source setting
d1 (Channels to use Measuring Power Supply A:
0 ~ 15)
d2 (Channels to use Measuring Power Supply B:
0 ~ 15)
“d1” and “d2” are total weights of the channels.
Channel 1 2 3 4
Weight 1 2 4 8
When Channels 1 and 2 are A and Channels 1
and 2 are B,
d1 = 3 (1+2)
d2 = 12 (4+8)
d3 (Noise filter: 0 ~ 1)
0: OFF High-speed changeover mode
1: ON Low noise mode
d4 (Current limit value for measurement: 0 ~ 4)
0: 0mA
1: 5mA
2: 10mA
3: 25mA
4: 50mA
d4 (Current limit value for charging: 0 ~ 4)
0: 0mA
1: 5mA
2: 10mA
3: 25mA
4: 50mA
[Note]
An external power supply unit does not have a
control function or a function to read states
relative to circuit connection of the voltage
source and measuring circuit. Correctly set
connection state of the power supply unit.
[Format]
PWS d1, d2, d3, d4, d5
d1: NR1 format
d2: NR1 format
d3: NR1 format
d4: NR1 format
d5: NR1 format
PWS? Measuring power source setting query
Query response in display mode is same as
setting. [Format]
PWS?
[Response]
d1, d2, d3, d4, d5