manualshive.com logo in svg

Hioki CM4002, Инструкция по эксплуатации

Поделиться
Скачать
Hioki CM4002 Скачать руководство пользователя страница 65

57

Backlight

Warning backlight

When any of the following occurs, the backlight will light up or blink in red to warn you.

 •

When excessive current is input

When the measured current exceeds the measurement range, the full-scale value on the 

main readout or sub-readout and 

OVER

 will blink. Quit the measurement immediately.

 •

When the measured current exceeds the measurement range (overrange)

The full-scale value on the main readout or sub-readout and 

OVER

 will blink. Switch over 

to an appropriate range.

 •

When the comparator function detects that the measured value exceeds the threshold value 

(p. 48)

Off

Automatically

Lit/Blinking (in red)

The warning backlight operates only for the present measured value. The warning backlight does not operate 

for the freezing value and recorded values of the MAX, MIN, AVG, PEAK MAX, and PEAK MIN display 

functions.

HIOKI CM4002A961-02

Содержание CM4002









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды