manualshive.com logo in svg

Hioki CM4002, Инструкция по эксплуатации

Поделиться
Скачать
Hioki CM4002 Скачать руководство пользователя страница 36

28

Installing Batteries and the Z3210 Wireless Adapter

NOTICE

 

„

Do not mix batteries of different ages or types.

 

„

Do not use a battery whose recommended service life has expired.

 

„

Do not reverse the battery polarity.

 

„

Do not leave the exhausted batteries in the instrument.

Doing so may cause the battery to leak, damaging the instrument.

 

„

Use the specified type of batteries only (LR6 Alkaline batteries).

 

„

Remove the batteries when the instrument is not in use for an 

extended period of time.

Failure to do so may cause the battery to leak, damaging the instrument.

 

„

Before handling the Z3210, eliminate static electricity on your body 

by touching any metallic part, such as a doorknob.

Failure to do so may cause static electricity to damage the Z3210.

 • When the 

 mark blinks, replace the batteries with new ones. The batteries are exhausted.

 •

Before replacing the batteries, turn off the instrument.

 •

Handle and dispose of batteries in accordance with local regulations.

HIOKI CM4002A961-02

Содержание CM4002









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды