Hioki 9603-01, Инструкция по эксплуатации, Страница: 7 / 32

iii
_____________________________________________________________________________________________
______________________________________________________________________________________________
DANGER
The measurement input terminal and chassis of the 3194 are not
isolated from each other. Do not exceed the maximum rated working
voltage. Doing so can damage the product or cause a serious accident.
NOTE
The 9603-01 is a factory-fitted option. It therefore requires the 3194 product for
calibration or repair.
For accurate measurement, allow one hour for warming up before use.
The 9603-01 can be used together with a strain gauge type torque meter, but
depending on torque meter specifications, the combination may not work.
It may not be possible to obtain accurate measurements close to a transformer or
conductor carrying a large high-frequency current, or close to any device such as
a radio transmitter generating a strong magnetic field.
To prevent damage to the product, cover the input connector with the supplied
cap when no signal is input.
Notes on Use
In order to ensure safe operation and to obtain maximum performance from
the product, observe the cautions listed below.