4.3 Temperature Correction (TC)
1
2
3
4
5
6
7
8
9
10
11
付録
索引
91
Press the keys shown in the table below to
switch the indication.
• If the resistance before correction
exceeds the measurement range, it
cannot be converted and the LCD
displays [
- - -
].
• After the tester is placed in temperature
correction mode, measurement or input of
temperature and measurement of
insulation resistance may be conducted.
• However, if the tester is placed in
temperature correction mode when the
temperature is not held (
is
off), measure or enter temperature before
measuring resistance. You cannot
measure resistance first.
• Resistance measured by the step voltage
test cannot be converted using
temperature correction.
• In temperature correction mode, leakage
current may be displayed by pressing the
key but it cannot be corrected for.
Indications to be switched
Keys used
key
Temperature
/
Reference temperature
↔
Elapsed time
key
key
Insulation resistance
(after correction)
Leakage current
(no correction)
↔
Setup screen of actual mea-
surement temperature
Standby state
↔
www.
.com
1.800.561.8187
