Hinds Instruments EXICOR MicroImager, Руководство пользователя

Страница: 48 / 57

Basic System Check
48 Exicor MicroImager User Manual
6
Maintenance
The Exicor
®
MicroImager requires very little maintenance.
Basic System Check
Check periodically, and when system maintenance is performed, that the covers on
the source and detector modules and the control system are secured properly. Be
certain that no unwanted light escapes from the source module.
Check periodically that interconnecting cables are free of sharp bends and cuts or
abrasions.
For safety, the instrument housings should be opened only by authorized
maintenance personnel.
Persons changing the cables or opening the covers on the system must:
•
Remove power to the system.
•
Understand the purpose, connections and voltages at each cable connection.
•
Understand the hazards associated with bright LED light.
•
Not allow eye exposure directly from LED light or any reflection of LED light from
a mirror like surface.
•
Understand all mechanical and electrical hazards that exist in the system.
Cleaning the Exterior
When cleaning the exterior of the Exicor MicroImager, care should be taken not to
scratch the surface or let liquids get inside the system.
An ammonia-based cleaner (such as glass cleaner) works well for cleaning the
outside. Do not allow any liquids to get inside the sample stage components or top
and bottom modules.
CAUTION
To avoid electrical shock and equipment damage, do not allow
any liquids to get inside the Exicor MicroImager. Do not clean
the system with the power ON or while the system is plugged
into an AC outlet.