HIMA HIMatrix F2 DO 8 01, Руководство пользователя

Страница: 27 / 40

F2 DO 8 01 4 Start-Up
HI 800 157 E Rev. 1.01 Page 27 of 40
4.4 Configuring a Remote I/O Using ELOP II Factory
4.4.1 Configuring the Relay Outputs
The signals previously defined in the Signal Editor (Hardware Management) are assigned
to the individual channels (outputs) using ELOP II Factory. Refer to the System Manual for
Compact Controller or the online help for more details.
The following chapter describes the system signals used for assigning signals in the
controller.
4.4.2 Signals and Error Codes for the Relay Output
The following tables specify the system signals that can be read and set for the relay
outputs, including the corresponding error codes.
In the user program, the error codes can be read using the signals assigned within the
logic.
The error codes can also be displayed in ELOP II Factory.