HIMA HIMatrix F2 DO 8 01, Руководство пользователя

Страница: 18 / 40

3 Product Description F2 DO 8 01
Page 18 of 40 HI 800 157 E Rev. 1.01
3.4.2 Communication
The remote I/O communicates with the associated controller via safe
ethernet
.
3.4.2.1 Connections for Ethernet Communication
Property Description
Ports 2 x RJ-45
Transfer standard 10/100/Base-T, half and full duplex
Auto negotiation Yes
Auto crossover Yes
Connection socket RJ-45
IP address Freely configurable
1)
Subnet mask Freely configurable
1)
Supported protocols
ƒ Safety-related: safe
ethernet
ƒ Non-safety-related:
programming and debugging tool (PADT), SNTP
1)
The general rules for assigning IP address and subnet masks must be adhered to.
Table 9: Ethernet Interfaces Properties
The two RJ-45 connectors with integrated LEDs are located on the bottom left-hand side of
the enclosure. Refer to Chapter 3.4.1.3 for a description of the LEDs function.
The connection parameters are read based on the MAC address (media access control
address) defined during manufacturing.
The MAC address for the remote I/O is specified on a label located above the two RJ-45
connectors (1 and 2).
Figure 4: Sample MAC Address Label
The remote I/O is equipped with an integrated switch for safety-related Ethernet
communication (safe
ethernet
). For further information on the integrated switch and
safe
ethernet,
refer to Chapter C
ommunication
of the System Manual for Compact Systems
(HI 800 141 E).
3.4.2.2 Network Ports Used for Ethernet Communication
UDP ports Usage
8000 Programming and operation with the programming tools
8001 Configuration of the remote I/O using the PES (ELOP II Factory)
8004 Configuration of the remote I/O using the PES (SILworX)
6010 safe
ethernet
123 SNTP (time synchronization between PES and remote I/O, PES and
external devices)
Table 10: Network Ports in Use