Hilti WSR 22-A, Руководство пользователя

Страница: 22 / 353

16
3.2 Use as directed
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶
Use only Hilti Li­ion batteries of the B 22 series with this product.
▶
Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Possible misuse
▶
Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶
Do not use the product to cut pipes that still contain liquids.
▶
Do not saw into unknown materials.
3.4 Lithium­ion battery status display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge status of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status Meaning
4 LEDs light up. • Charge status: 75 % to 100 %
3 LEDs light up. • Charge status: 50 % to 75 %
2 LEDs light up. • Charge status: 25 % to 50 %
1 LED lights. • Charge status: 10 % to 25 %
1 LED blinks. • Charge status: < 10 %
1 LED blinks, the power tool is not ready for use. • The battery has overheated or is completely
discharged.
4 LEDs blink, the power tool is not ready for use. • The power tool is overloaded or has overheated.
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
3.5 Items supplied
Reciprocating saw, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
4 Technical data
4.1 Reciprocating saw
WSR 22­A
Rated voltage
21.6 V
Weight in accordance with EPTA procedure 01/2003 3.8 kg
Stroke rate 0 rpm … 3,000 rpm
Stroke 28 mm
Keyless chuck for standard accessory tools 1/2 in
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one electric tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the electric
Printed: 06.11.2015 | Doc-Nr: PUB / 5071366 / 000 / 03