
18
Never operate the tool when the ventilation slots
are blocked. Clean the ventilation slots carefully using
a dry brush. Don’t permit foreign objects to enter the
interior of the tool.
Clean the dust shield on the chuck at regular intervals
using a clean, dry cloth. Carefully wipe the sealing lip
and grease it with a little Hilti grease.
It is essential that
the dust shield is replaced when the sealing lip is dam-
aged.
Proceed as follows: Insert a screwdriver at the
edge of the dust shield and lift it out in a forwards direc-
tion. Clean the contact surface and insert a new dust
shield. Press it in firmly until it engages.
Also take care of your insert tools. Clean off dirt and dust
deposits and protect your insert tools from corrosion
by wiping them from time to time with an oil-soaked rag.
Always keep the connection end clean and lightly greased.
Maintenance, Service Indicator
Regularly check all external parts of the tool for
damage and that all controls operate faultlessly. Don’t
operate the tool when parts are damaged or when the
controls do not function faultlessly. Have your tool repaired
by a Hilti service center.
The tool is equipped with a service indicator
.
When the indicator lights:
The carbon brushes have
reached the end of their life. The tool can be operated
for approx. 8 hours more after the service indicator light
comes on, until the automatic cut-out will be activated.
Take the tool to a Hilti service center for planned routine
maintenance when the service indicator light illuminates.
When the indicator flashes:
An electrical fault has
occurred. The tool has been switched off automatical-
ly. Have your tool repaired by a Hilti service center.
9. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
10. Disposal
Return waste material for recycling
Most of the materials from which Hilti power tools are
manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many
countries, Hilti has already made arrangements for tak-
ing back your old electric tools for recycling. Please ask
your Hilti customer service department or Hilti sales rep-
resentative for further information.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric tools
that have reached the end of their life must be collected
separately and returned to an environmentally compat-
ible recycling facility.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071194 / 000 / 00
Содержание TE 76
