Hilti TE 6-S, Руководство по эксплуатации

Страница: 13 / 46

8
en
9. Insert tools and accessories
TE-C chuck
●
TE-C angular chuck
●
TE-AC 1 angular chuck
●
Hammer drill bits 4–24 mm dia. ( 3 /
16
″
–1
″
dia.)
Bit holder
●
Thin-barrel core bits 25–68 mm dia. (1
″
–2 5 /
8
″
dia.)
Keyless chuck (quick release)
●
Drill bits for wood 5–20 mm dia. ( 3 /
16
″
– 3 /
4
″
dia.)
Drill bits for metal 5–13 mm dia. ( 3 /
16
″
– 1 /
2
″
dia.)
Stepped (stop) drill bits 5–22 mm dia. ( 3 /
16
″
– 5 /
8
″
dia.)
Hole saws 25–68 mm dia. (1
″
–2 5 /
8
″
dia.)
DRS dust removal module
●
9.1 DRS dust removal module
9.1.1 General information
Location of identification data on the tool
The type designation and serial number can be found on the type plate on the tool. Make a note of this data in your
operating instructions and always refer to it when making an enquiry to your Hilti representative or service depart-
ment.
Type: Serial no.:
9.1.2 Description
The DRS dust removal module is an accessory for the TE-6 rotary hammer drill. It can be attached to the rotary hammer
drill quickly and easily. The dust removal module is not suitable for chiselling work or for rotary drilling in metal.
9.1.3 Technical data
Power input Max. 60 W
Suction performance 500 l/min
Weight 0.9 kg (2.03 lbs)
Maximum effective stroke 105 mm (4.1
″
)
TE-C hammer drill bit diameter range (I
t
/cm): 4–16 mm dia. ( 3 /
16
″
– 5 /
8
″
dia.)
Drill bit working length 50–100 mm (2–4
″
)
Contact pressure 15–25 N
Dust container capacity
6 mm ( 1 /
4
″
) dia. / 28 mm (1.1
″
) deep 130 holes
8 mm ( 5 /
16
″
) dia. / 30 mm (1.2
″
) deep 75 holes
12 mm ( 1 /
2
″
) dia. / 50 mm (2
″
) deep 20 holes
Dust container regeneration cycles Up to 100 cycles
Extraction head 4–16 mm dia. ( 3 /
16
″
– 5 /
8
″
dia.)
Extraction fan, dust container with folded filter, depth gauge, length stop, plug-type connection
9.1.4 Before use
Attaching the dust removal module

The extraction fan incorporated in the dust removal mod-
ule is driven by the motor of the rotary hammer drill by
way of a plug-type coupling. The teeth on the rotor shaft
(1) mesh with the teeth on the sleeve (2) of the dust
removal module drive shaft.
1. Unplug the supply cord.
2. Push the dust removal module along the guide (3) on
the rotary hammer drill until it engages securely in
place.
Removing the dust module

1. Unplug the supply cord.
2. Press the release latch (4) and hold it in this position.
Printed: 07.07.2013 | Doc-Nr: PUB / 5071103 / 000 / 00