1
en
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating instruc-
tions are with the tool when it is
given to other persons.
TE 6-S rotary hammer drill
1. General information
1.1 Indication of danger
-CAUTION-
This word is used to draw attention to a potentially dan-
gerous situation which could lead to minor personal injury
or damage to the equipment or other property.
1.2 Pictograms
Contents
Page
1. General information
1
2. Technical data
2
3. General safety rules
2
4. Specific safety rules and symbols
5
5. Functional description
5
6. Assembly
6
7. Operation
6
8. Care and maintenance
7
9. Accessories
8
10. Manufacturer's warranty – tools
9
11. Disposal
10
12. Troubleshooting
10
Operating controls and components
Chuck
Function selection switch
On/off switch
Forwards/reverse switch
Side handle with depth gauge
Connection for the dust removal module
Supply cord
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cov-
er pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
always refers to the TE 6-S rotary hammer drill.
Location of identification data on the tool
The type designation and serial number can be found on
the type plate on the tool. Make a note of this data in your
operating instructions and always refer to it when mak-
ing an enquiry to your Hilti representative or service
department.
Type:
Serial no.:
Warning signs
General
warning
Warning:
electricity
Warning:
hot surface
Obligation signs
Symbols
Wear eye
protection
Wear ear
protection
Wear protective
gloves
Read the operat-
ing instructions
before use.
Wear breathing
protection
ORIGINAL OPERATING INSTRUCTIONS
Printed: 07.07.2013 | Doc-Nr: PUB / 5071103 / 000 / 00