Rankam GR2297802-MM-00 Assembly & Operating Instructions Download

Page: 1 / 52

1 of 52

20191105-Ver.1.0

PELLET HYBRID GRILL
Model number: GR2297802-MM-00
ASSEMBLY & OPERATING INSTRUCTIONS

For Outdoor Use Only

⚫

This instruction manual contains important information necessary for the

proper assembly and safe use of the appliance.

⚫

Read and follow all warnings and instructions before assembling/using the

appliance.

⚫

Follow all warnings and instructions when using the appliance.

⚫

Failure to follow these instructions and warnings could result in damage to the

product or injury to the user.

⚫

Keep this manual for further reference.

Should you encounter any problem,

CALL US FIRST.

Do not return product to the store.

WE CAN HELP.

For assistance, contact customer service at

[email protected]

or at

1-888-837-1380

, Mon to Fri, 8:00am

– 5:00pm Pacific Standard time

Summary of Contents for GR2297802-MM-00





















































Search results

Summary of Contents for GR2297802-MM-00

Reviews:

Related manuals for GR2297802-MM-00

Brands by name

Popular brands

Rankam GR2297802-MM-00, Assembly & Operating Instructions

Search results

Summary of Contents for GR2297802-MM-00

Reviews:

Related manuals for GR2297802-MM-00

Brands by name

Popular brands