![background image](http://html1.mh-extra.com/html/hilti/te-50-avr/te-50-avr_manual_2135415025.webp)
*2102965*
2102965
English
19
9.1
Troubleshooting
Trouble or fault
Possible cause
Action to be taken
The power tool doesn’t start.
Interruption in the electric supply.
▶
Plug in another electric tool or
appliance and check whether it
works.
The electronic restart interlock is
activated after an interruption in
the electric supply.
▶
Switch the power tool off and
then on again.
No hammering action.
The power tool is too cold.
▶
Bring the tip of the drill bit
into contact with the working
surface, switch the rotary
hammer on and allow it to
run. If necessary, repeat the
procedure until the hammering
mechanism begins to operate.
The combihammer doesn’t
achieve full power.
The gauge (cross section) of the
extension cord conductors is inad-
equate.
▶
Use an extension cord with
an adequate conductor cross
section.
The voltage provided by the elec-
tric supply is too low.
▶
Connect the combihammer to a
different electric supply.
The drill bit doesn’t rotate.
The function selector switch is not
engaged or is in the
“Chiseling”
or
“Chisel adjustment” position.
▶
Set the function selector switch
to the “Hammer drilling” position
.
The drill bit can’t be released. The chuck is not pulled back fully.
▶
Pull the chuck back as far
as it will go and remove the
accessory tool.
The side handle is not fitted cor-
rectly.
▶
Release the side handle and refit
it correctly so that the clamping
band and side handle engage in
the recess.
The service indicator lights
after changing the carbon
brushes.
The contact surfaces are not yet
run in.
▶
Run in the carbon brushes by
allowing the power tool to run
under no load for at least 1
minute without interruption.
10
Disposal
Most of the materials from which
Hilti
tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti representative
for further information.
▶
Disposal of electric tools or appliances together with household waste is not permissible.
11
RoHS (Restriction of Hazardous Substances)
Click on the link to go to the table of hazardous substances: qr.hilti.com/r4902202.
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
12
Manufacturer’s warranty
▶
Please contact your local
Hilti
representative if you have questions about the warranty conditions.
Printed: 22.02.2018 | Doc-Nr: PUB / 5283607 / 000 / 04
Содержание TE 50-AVR
