Hilti PR 25, Руководство пользователя, Страница: 27 / 141

23
en
This device complies with Part 15 of the FCC Rules and
RSS-210 of IC. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Information plates on the product:
-CAUTION-
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio com-
munications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment on and off, the user is encour-
aged to try to correct the interference by one or more of
the following measures:
●
Re-orient or re-locate the receiving antenna.
●
Increase the distance between the equipment and
receiver.
●
Connect the equipment to an outlet on a circuit dif-
ferent from that to which the receiver is connected.
●
Consult the dealer or an experienced TV/radio tech-
nician for assistance.
Changes or modifications not expressly approved by
Hilti could restrict the user's right to operate the equip-
ment.
12. FCC statement (applicable in US) / IC statement (applicable in Canada)
CLASS II LASER PRODUCT
620-690nm/0.95mW max.
LASER RADIATION - DO NOT
STARE INTO BEAM
2
1/4 s
319699
This Laser Product
EN 60825-1:2003
complies with 21CFR
1040 as applicable
PR 25
Made in Germany
Hilti= registered trademark of the Hilti Corporation, Schaan, Liechtenstein
Power: 4,5V=nom./150 mA
CLASS IIIa LASER PRODUCT
620-690nm/2.45mW max.
LASER RADIATION - DO NOT STARE INTO
BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
3R
3
19700
PR 25 IF
Made in Germany
Hilti= registered trademark of the Hilti Corporation, Schaan, Liechtenstein
Power: 4,5V=nom./150 mA
EN 60825-1:2003
This Laser Product
complies with 21CFR
1040 as applicable
13. EC conformity
In conformance with CE
We declare, on our own responsibility, that this product
complies with the following directives and standards:
EN 300 440-2, EN 301 489-3 V1.4.1,
EN 60950-1:2001/IEC 60950-1:2001,
EN 55022 + A1 + A2:2003
Designation: Rotating laser
Type: PR 25/PR 25 IF
Year of design: 2004
Hilti Corporation
Matthias Gillner Dr. Heinz-Joachim Schneider
Head BU Measuring Systems Executive Vice President
01 / 2005 BA Electric Tools & Accessories
01 / 2005
Printed: 07.07.2013 | Doc-Nr: PUB / 5070173 / 000 / 00