Configuration
33/58
NXIO 100-RE Board | Configuration and Hardware Description
DOC061101UM02EN | Revision 2 | English | 2011-06 | Released | Public
Hilscher, 2006-2011
¾
Set the communications parameters for the module as shown in the
dialog below.
Figure 17: Module Properties
¾
Determine a name and enter a short description of the module.
¾
Select the slot number in which the module is installed in the controller.
¾
Select
Data - INT
as the
Comm_Format
.
¾
Set the connection parameters as they are shown in the dialog.
Connection Parameter
Assembly Instance
Size (in Words)
Input 101 6
Output 100
2
Configuration 1
0
Table 16: Connection Parameters
