LED
46/58
NXIO 100-RE Board | Configuration and Hardware Description
DOC061101UM02EN | Revision 2 | English | 2011-06 | Released | Public
Hilscher, 2006-2011
LED State Definition for EtherCAT Slave for the RUN and ERR LEDs
Indicator state
Definition
On
The indicator is constantly on.
Off
The indicator is constantly off.
Blinking
The indicator turns on and off with a frequency of 2,5 Hz: on for
200 ms, followed by off for 200 ms.
Single Flash
The indicator shows one short flash (200 ms) followed by a
long off phase (1,000 ms).
Double Flash
The indicator shows a sequence of two short flashes (each
200 ms), separated by a short off phase (200 ms). The
sequence is finished by a long off phase (1,000 ms).
Table 34: LED State Definition for EtherCAT Slave for the RUN and ERR LEDs
