Descriptions
17/83
2.6.4
X900 – Connector for NXHX fieldbus adapter modules
Pin header connector
X900
for NXHX fieldbus adapter modules. For
identifying the connector on the board, see position
(1)
of interfaces and operating elements
You can mount the following modules on this connector:
·
NXHX‑DP
for PROFIBUS (part number: 7923.410)
·
NXHX‑CO
for CAN open (part number: 7923.500)
·
NXHX‑DN
for DeviceNet (part number: 7923.510)
·
NXHX‑CC
for CC-Link (part number: 7923.740)
Note:
Each fieldbus module requires the appropriate fieldbus-specific
communication firmware on the netX.
X900
Pin
Signal
1
XM0_TX
2
XM0_RX
3
XM0_IO0
4
XM0_IO1
5
GND
6
+3V3
7
Not connected
8
Not connected
9
Not connected
10
Not connected
Table 13: Pin Assignment X900
For the technical details of the fieldbus adapter modules, see section
NXHX 90-MC | Device description
DOC200602HW01EN | Revision 1 | English | 2021-02 | Released | Public
© Hilscher 2021