hilscher NXHX 90-MC, Описание устройства

Страница: 8 / 83

Descriptions 8/83
2.4 Positions of interfaces and operating elements
Figure 3: Positions on NXHX 90-MC
No. in
figure Name Description For details see section
(1) X900 Connector for NXHX fieldbus adapter modules X900 – Connector for NXHX fieldbus adapter
modules
[
}
page 17]
(2) S400 Slide switches for selecting console mode and
alternative boot mode S400 – Slide switches for console mode and
alternative boot mode
[
}
page 10]
(3) X1001 Measuring points (vias) for UART via FTDI X1001 – Measuring points (vias) for UART via
FTDI
[
}
page 20]
(4) SYS
(P400) SYS LED (system status) LEDs [
}
page 26]
(5) X601 Serial Dual Port Memory (SPM) host interface
connector for SQI/SPI X601 – SPM host interface connector via SQI/
SPI
[
}
page 16]
(6) S701 Slide switches for:
· Configuring JTAG interface
(via 20 pin connector or USB jack)
·
Configuring UART interface
(via NXHX-RS232 connector or USB jack)
· Enabling user LEDs or ADCs
S701 – Slide switches for selecting JTAG, UART,
ADCs and user LEDs
[ } page 14]
(7) X902 Connector for NXHX-RS232 adapter module X902 – Connector for NXHX-RS232 adapter
module (UART)
[ } page 19]
(8) X901 Connector for NXHX-ENC module, MMIO and
BiSS signals X901 – Sensor connector for NXHX-ENC and
standard MMIOs
[
}
page 18]
NXHX 90-MC | Device description
DOC200602HW01EN | Revision 1 | English | 2021-02 | Released | Public © Hilscher 2021