hilscher NXHX 90-MC, Описание устройства

Страница: 15 / 83

Descriptions 15/83
2.6 Interfaces
2.6.1 X400 – JTAG connector
JTAG MIPI-20 connector X400 . For identifying the connector on the board,
see position (22) in section Positions of interfaces and operating
elements [
}
page 8].
Note:
To enable this interface, put switch 1 of S701 into ON position (see
position (6) in section Positions of interfaces and operating
elements [ } page 8]).
JTAG Pin Signal
JTAG SWD
1
+3V3 3V3
2
TMS SWDIO
3
GND GND
4
TCLK SWDCLK
5
GND GND
6
TDO TRACE_CTL
7 Not connected Not connected
8
TDI
Not connected
9
GND GND
10
RESET# RESET#
11
GND GND
12 Not connected
TRACE_CLK
13
GND GND
14
MLED0 TRACE_DATA_0
15
GND GND
16
MLED1 TRACE_DATA_1
17
GND GND
18
MLED2 TRACE_DATA_2
19
GND GND
20
MLED3 TRACE_DATA_3
Table 10: Pin assignments MIPI-20 JTAG connector
More information about JTAG connectors and signals can be found
in the netX 90 FAQ on the Hilscher knowledgebase under
https://kb.hilscher.com/x/NgBRBg .
NXHX 90-MC | Device description
DOC200602HW01EN | Revision 1 | English | 2021-02 | Released | Public © Hilscher 2021