hilscher NXHX 90-MC, Описание устройства

Страница: 18 / 83

Descriptions 18/83
2.6.5 X901 – Sensor connector for NXHX-ENC and standard MMIOs
MMIO pin header connector X901 for the NXHX-ENC (part number
7924.000).
This connector can also be used as interface for standard MMIO, BiSS and
EnDat signals, and for connecting UART (NXHX-RS232 adapter module)
and CAN (NXHX-CO adapter module) peripherals to the application CPU of
the netX 90.
For identifying the connector on the board, see position (8) in section
Positions of interfaces and operating elements [ } page 8].
X901 Pin Signal
No netX 90 X901 signal EnDat BiSS NXHX-CO NXHX-RS232
1 COM_IO0/
ADC3_IN2
AIM ENDAT0_OUT BISS0_MO CAN0_APP_TX
CAN1_APP_TX
UART_APP
_TXD
2 MMIO4/
ADC0_IN0
SIN_SIN0
_HA
ENDAT0_IN BISS0_SL CAN0_APP_RX
CAN1_APP_RX
UART_APP
_RXD
3 MII0_TXD
2/
ADC2_IN4
AI ENDAT0_CLK BISS0_MA – UART_APP
_RTS#
4 MMIO6/
ADC1_IN0
COS_SIN120
_HB
ENDAT0_OE BISS0_OE - UART_APP
_CTS#
5 GND
GND - - GND GND
6 +3V3
+3V3 - - +3V3 +3V3
7 GND
GND - - PIO4 PIO4
8 MMIO3/
ADC3_IN3
SIN240_HC - - PIO5 PIO5
9 MII1_TXC
LK/
ADC2_IN2
POT - - RSTOUT RSTOUT
10 GND
GND - - - -
Table 14: Pin assignments X901
Note:
If you intend to use EnDat or BiSS signals, make sure to set all
switches of S700 to OFF position. For identifying S700 on the
board, see position (23) in section Positions of interfaces and
operating elements [
}
page 8].
·
For technical details of the NXHX-ENC module, see section NXHX-ENC
module [ } page 32].
·
For technical details of the NXHX-RS232 module, see section NXHX-
RS232 serial interface adapter [
}
page 31].
· For technical details of the NXHX-CO module, see section NXHX-
CO [
}
page 29].
NXHX 90-MC | Device description
DOC200602HW01EN | Revision 1 | English | 2021-02 | Released | Public © Hilscher 2021