End-of-line programming
64/70
Ê
The flasher writes the file to the device. The end of the action is
indicated by the
Image flashed
message:
Figure 18: Image flashed
Option 2
(specify interface directly in command line)
Ø
First find out and note the exact name of the interface that you want to
use.
Ê
In this example, you want to use the
romloader_jtag_netX90_COM@NXHX_90-JTAG@7:1
interface.
Ø
To start flashing, enter the following command:
lua5.1.exe cli_flash.lua flash -p romloader_jtag_netX90_COM@NXHX_90-
JTAG@7:1 -b 2 -u 0 -cs 0 -s 0x3000 firmware.nxi
Figure 19: Example of specifying flasher interface in command line
The flasher writes the file to the device. The end of the action is indicated
by the
Image flashed
message.
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public
© Hilscher 2019
