hilscher netX 90, Руководство по производству

Страница: 10 / 70

Software architecture 10/70
Hilscher’s netX Studio CDT IDE includes all components required to
configure, develop and debug the embedded application software.
The “flasher” utility included in the netX Studio CDT installation can be used
to flash/program all necessary software components to the netX 90-based
device.
You can access and use the flasher utility either via the netX Studio GUI
(recommended for software development or flashing of single prototypes)
or via command line interface (recommended for end-of-line mass
production).
The software components that need to be flashed to the netX 90 are
described in full detail in section
Files [
}
page 20] of this document.
Figure 2: Software for communication and application CPUs (stand-alone-chip solution)
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public © Hilscher 2019