hilscher netX 90, Руководство по производству

Страница: 56 / 70

End-of-line programming 56/70
Note:
If the netX 90 is not in its “blank” state because a valid
communication firmware is already residing in the flash, you can
“force” the ROM code into console mode by pulling the RDY pin of
the netX 90 to GND (i.e. if the pin is accessible. Consult the
hardware documentation of your netX 90 device for information on
this).
See also section Console mode [
}
page 45].
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public © Hilscher 2019