hilscher netX 90, Руководство по производству

Страница: 38 / 70

Software architecture 38/70
Offset in FDL if defined
as area 4 Name of the field in FDL Value to be entered at offset in
FDL
Dec Hex
636 0x027C
Area 4 content type
HIL_PRODUCT_DATA_FLASH_LA
YOUT_CONTENT_TYPE_MFW
(0x09)
640 0x0280
Area 4 start address
0x61000
644 0x0280
Area 4 size Use cases A & B:
0x15000
Use case C:
0x1F000
648 0x0288
Area 4 chip number
0x1
652 0x028C
Area 4 name
Maintenance
668 0x029C
Area 4 access type
O_RDONLY
Table 20: Flash area 4 definition in FDL for maintenance firmware
Offset in FDL if defined
as area 5 Name of the field in
FDL Value to be entered at offset in FDL
Dec Hex
672 0x02A0
Area 5 content type
HIL_PRODUCT_DATA_FLASH_LAYOUT_
CONTENT_TYPE_MFW
676 0x02A4
Area 5 start address
0x61000
680 0x02A8
Area 5 size Use cases A & B:
0x15000
Use case C:
0x1F000
684 0x02AC
Area 5 chip number
0x1
688 0x02B0
Area 5 name
Maintenance
704 0x02C0
Area 5 access type
O_RDONLY
Table 21: Flash area 5 definition in FDL for maintenance firmware
See also FDL Content: Flash Layout Table [
}
page 30] and section Flash
layout [
}
page 11].
HW config file
Because the ROM Loader cannot use the “standard”
*.hwc
hardware
configuration file while executing the maintenance firmware, a separate
*.mwc
configuration file is required to provide necessary hardware
information like boot mode and flash parameters for the maintenance
firmware (see subsequent section).
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public © Hilscher 2019