Parameterization
62/98
SmartWire-DT Gateway | EU5C-SWD-ETHERCAT
DOC140901UM01EN | Revision 1 | English | 2015-03 | Released | Public
© Hilscher 2015
The
Edit
CANopen Startup Entry
dialog window
opens. The
Data
(hexbin)
field displays the preset hexadecimal value of the options
byte. In case of the
DIL-SWD-32-001
device, this is the value
02
:
Figure 31: Editing device options of SWD device (2)
Enter the new hexadecimal value of the options byte into the
Data
(hexbin)
field. Omit the
0x
prefix; i. e. enter the value
0x12
simply as
string
12
.
Note:
Individual parameters of the
Options
element (i. e. the device
options) can only be configured by entering a single hexadecimal options
byte. For changing one or several parameters, you therefore have to
recalculate the whole options byte of the device. The outcome of this
calculation depends on the parameter bits you have changed and on the
default settings of the device.
Entering the value
12
in this example means that the device may in future
be replaced by an universal module in the SmartWire-DT network.
For examples of how to calculate the options byte, see
Examples of
calculating the options byte
section on page 63.
Take over the new value by clicking the
OK
button.