Device Address
57/64
COM-C | Communication Module
DOC021001DG12EN | Revision 12 | English | 2011-06 | Released | Public
© Hilscher, 2002-2011
5 Device
Address
The COM-CA Slave Modules have the rotary switch to set up the device address on board. If the
Module COM-CN is used for slave the address can be set by software over the dual-port memory.
Note:
This feature is not available at the CC-Link Module COM-Cx-CCS, because the CC-
Link Communication Controller allows only a direct connection of the address switches.
Figure 10: Schematic to read in the device address for COM-CN Slave Modules
