Hillyard 108538, Руководство по обслуживанию

Страница: 49 / 117

Main Menu (R30SC Base)
MENU DESCRIPTION
T MOTOR CURRENT
Imot= ## Amps Traction Motor Current.
T MOTOR VOLTAGE
Vmot = ##.# Volts Traction Motor Voltage.
T MOTOR SPEED
#.# Km/h Machine Speed.
BR MOTORS
Imot= #.# #.# Amps Brush Motors Current.
VAC MOTOR
Imot= #.# #.# Amps Vacuum Motor Current.
REF. VOLTAGE
Vref = #.# Volts Speed reference voltage (potentiometer).
HEATSINK TEMP.
T= ##
°
C / ###
°
F
Internal heat-sink temperature.
BATTERY VOLTAGE
Vbatt= ##.# Volts Battery supply voltage.
Overload level:
##% (at ##Amps) Ammeter protection (overload) level; at 100% the alarm is displayed.
Inputs monitor
J#:#,#,##,##,## Connector’s Inputs status. See next table.
MAIN HOURMETER
#### hrs, ## min Measure of worked time (when the Pedal is pressed).
KEY HOURMETER
#### hrs, ## min Measure of worked time (When the Key is in ON position).
SERV. HOURMETER
#### hrs, ## min Maintenance interval timer.
TR. HOURMETER
####,## Measure of worked time (when the Traction motor is working).
BR. HOURMETER
####,## Measure of worked time (when the Central brush motors are working).
BR3 HOURMETER
####,## Measure of worked time (when the Side brush motor is working).
VAC. HOURMETER
####,## Measure of worked time (when the Vacuum motor is working).
Alarms LOG. HOURMETER
alarms Recorded alarms Historical
SW RELEASE
7CFX1A00 #.#.# Software release number.
Inputs monitor
INPUT DESCRIPTION
J4 : 2=Encoder 3=Encoder
J8 : 5=Electrobrake 6=Multimode 7=Extrapressure Lever 8=Brushdeck Lever Micro 13=Horn 15=Seat
Micro 16=Backward Lever 17=Squeegee Lever Micro
J11 : 2=Actuator 5=Extrapressure
49