8.3
Work requirements
The Water unit only works if the following conditions are met:
The batteries are not discharged.
The operator is seated on the machine so as to press the
seat safety switch (1).
The machine is on (2).
The electrobrake is activated (3).
(R30SC-R28SC PLUS) the functions setting on the display
is Washing or W Drying (4).
(R30SC Base) The control lever is lowered to release the
micro (4).
(R30SC-R28SC PLUS) The water valve is open (4c), and
on the display the water level is ECO mode or more than
zero.
(R30SC Base) The water valve is open (4c).
The recovery tank is not full (5).
The brake pedal is not pressed (6).
The accelerator pedal is pressed (7).
8.4
Operating mode
WASHING
Assumption
Action
Result
Machine ON
Operator Sitting
Washing Enabled
Forward pedal pressed
Solenoid Valve ON if water level is different than 0
(+24V to J6-13 to J6-5)
Solution Pump ON if water level is different than 0
(+24V to Pa)
Machine ON
Operator Sitting
Dosing system enabled
during work
Chemical Pump ON if water level is different than 0
(+24V to Pd)
Machine ON
Operator Sitting
Backward function enabled
during work
Solution Pump OFF
Solenoid Valve OFF
Chemical Pump OFF (if available)
Machine ON
Operator Sitting
Traction Pedal not pressed
during work
Solution Pump OFF
Solenoid Valve OFF
Chemical Pump OFF (if available)
Machine ON
Operator Sitting
Washing disabled
during work
Solution Pump OFF
Solenoid Valve OFF
Chemical Pump OFF (if available)
102
Содержание 108538
